|
Left side view:
1. Partition Baffle: (face panel) One of the most
important feature of any air-cooled slide in system, but the most
over looked is the Partition Baffle. The Partition Baffle is responsible
in preventing the re-circulation of heated air generated by the
engine & heat exchange system. All White Magic slide-ins have been
designed with this feature in mind. The signature series partition
baffles are connected by gasket material to the air intake of the
engine housing to insure proper airflow of the machine is achieved.
2. Engine: 15 HP Kohler Air Cooled Engine, Kohler
Command Pro Engines are designed with overhead -valves, exclusive
hydraulic valve lifters, full pressure lubrication. All Command
Pro Engines are fitted with a Plate-type oil cooler which helps
maintain proper engine function.
3. Belt Guard: an aluminum safety guard, protecting
the operator and machine from harm, covers the pulley & belts.
4. CAT PUMP ® 3CP Pump:
Far superior from any other pump manufacturers, Cat pump delivers
outstanding reliability and performance. Mounted in the machine
high above all other components allows for quick and easy service
of the pump. While performing service the pump does not need to
be un-bolted or readjusted, all service can be done in place. This
saves hours of down time and expense to the equipment owner. 
5. Pulsation Dampener:
This is a nitrogen charged shock absorber for the pumping
system. As the ceramic plungers push water into the system, a vibration
is given off. The pulsation or vibration is absorbed helping prevent
premature failure of fittings and components.
6. Oil Drain valve: The signature series offers
this outstanding feature only found on White Magic Equipment. The
Engine, Pump, and Blower all are furnished with ¼” ball valves for
quick access to oil changes. As an added benefit the oil drains
are connected together in one central line and exit the machine
through the face panel. (See point # 7 on the external features
page) This eliminates any chance of messy oil spills during routine
services.
7. Heat Exchange System: Making up the heart of
the Heatsmart Technology is our double barrel heat exchanger. Constructed
with the White Magic exclusive High Efficiency Finned Copper Coil,
this coil is far superior to other coil designs found elsewhere
in the United States. The heat exchanger is designed to maximize
both airflow and heat transfer. As the water flows through the heat
exchanger it enters at the coolest point and exits the heat exchanger
at the hottest point. This is commonly referred to as Reverse Flow.
8. ROOTS™ 33 Blower: White Magic has selected
ROOTS™ as our exclusive vendor for Vacuum
Blowers. The Rebel is outfitted with the ROOTS™
33 blower providing over 200 CFM and 14”Hg of vacuum lift. This
Blower is capable of producing exceptional performance for all aspects
of residential carpet & upholstery cleaning. The dual lobe blower
design is far superior and more reliable to the new tri-lobe blower
designs available in the cleaning industry. White Magic provides
many additional features to the blower system such as: Blower oil
level site tube, remote grease fittings for ease of maintenance
& the White Magic exclusive grease cup, which captures expelled
grease and prevents it from spilling all over the internal components
of the machine.
9. Frame Assembly: Constructed from heavy gauge
steel, the frame also provides easy lifting with its built in fork
lift pads.
10. Progressive Silencing System:
White Magic engineers have worked tirelessly to maximize performance
without restricting airflow. The Progressive Silencing system works
by stepping down the noise generated by the carpet cleaning system
at specific locations throughout the machine. Illustrated in this
photo is the last stage of the silencing system.
Right side view:
11. Vacuum Pod Diverter Control: As the temperature
reaches its predetermined setting established by the operator, the
Temperature Sensor sends an electrical signal to the vacuum control
vacuum switches (18) which activates the Vacuum Pod (11) to open
and close the Heat Diverter (13). to maintain the desired operating
solution temperatures. 
12. Chemical Injection Pump:
This pump operates with out the use of a diaphragm spring,
which add to the longevity of the pump. The Chemical is injected
at the final stage of the pumping system. This eliminates chemical
residue build-up within the pumping system, heat exchange system
and system controls. Made completely out of stainless steel with
a high pressure O’ ring, this pump will resist corrosion and damage
caused by high pressure tile cleaning, better then similar pumps
made out of brass.
13. Engine Exhaust Heat Diverter: This component
operates by directing the flow of hot gases produced by the engine.
During operation of the machine the heat generated by the engines
exhaust will flow the heat exchange system to heat the cleaning
solution. Once the cleaning solution has reached the pre-determined
temperature set by the operator the temperature sensor (25) will
activate the vacuum diverter control (11) closing the Exhaust Diverter
preventing the hot gases from entering the heat exchange systems.
The Heat Diverters internal components are made from Stainless Steel
and are nickel-plated to extended the life of the diverter.
14. Stainless Steel Braided Hoses:
White Magic uses only Stainless Steel high-pressure hoses to interconnect
the systems solution and pumping system.
15. Water Mix Valve: This convenient feature allows
for further temperature adjustment for sensitive fabric cleaning
such as; wool oriental carpets or Haitian cotton upholstery etc…
By opening this valve it allows cold water from the pump to bypass
the Heat Exchange System and go directly to the cleaning tool.
16. Temperature Gauge Sending Unit: Located just
behind the solution disconnects away from any of the heat exchanger
components, this sending unit reads the out going solution temperature
and displays the temperature on the temperature gauge 
17. Primary System Kill Switch:
This is the primary engine kill switch interrupts the engine electrical
system and shuts down the machine if the solution temperature reaches
the factory setting of 285°F. It can be adjusted by a service technician
if necessary. If this occurs the operator can quickly determine
the cause or the shut down by looking at the indicator lights on
the face panel of the machine.
18. Vacuum Pod Control Switch: Refer to # 11
19. Engine Oil Filter: The design
of the machine allows for easy changing of the Oil Filter.
20. High Pressure Fuel Safety Valve: This Valve
protects the engine fuel system from forcing fuel back from the
vehicles fuel system.
21. Pressure Reducer: Located on the input of
the water box the pressure reducer assures that the input water
pressure is consistent, for extra protection of the internal float
valve.
22. Water Box: Constructed from Stainless Steel,
the water box provides the incoming water to the pump. The box can
contain a max. of 2 gallons of water and a host of other features.
The water box has 4 easy to remove thumbscrews that hold down the
gasket material cover, preventing water from spill over on to the
machine. The water box also has overflow protection, filtered input
and allows for simple winterization of the machine in cold weather
climates.
23. Secondary Safety Kill Switch: This safety
feature protects the operator, bystanders and the machine from dangerous
overheating of the systems water temperature rating. This Safety
Kill Switch will shut the machines engine down if the solution temperature
exceeds 275°F.
24. Pressure Relief Valve: This valve is factory
set to prevent over pressurization of the machine. When the machine
reaches it’s setting the valve opens to relieve access pressure
developed by the pumping system. This valve allows the operator
to adjust the pressure up to 1200 PSI for tile and grout cleaning.
25. Temperature Sensor: Located at the hottest
point of the heat exchanger,this sensors function is to control
the heat diverter system. When the operator adjusts the temperature
knob located on the face panel of the machine it controls the sensitivity
of this sending unit, providing the desired temperature to the cleaning
tool.
Click Here To Return to top of
page...
*All features subject to change without notice.
All specifications are subject to change without notice. Major components
specifications are manufacturers maximum ratings. System is de-rated
for maximum life. Engine and blower are used to 70-80% capacities.
System pressure is set at 1200 PSI. |
